In this article, we will compare 2 post lifts vs 4 posts. In addition, we will discuss the difference between chain drive and cable drive, safety, and cost. Which type of lift is right for your vehicle? Read on to discover the pros and cons of each type. You’ll be glad you did! And if you’re still unsure, a detailed breakdown here are some tips to help you make a decision. We’ve also included links to helpful resources.

2 post lift vs 4 post lift

If you own a garage that is too small to house a car lift, consider a two-post lift. This simple yet effective piece of equipment is ideal for small cars and most residential garages. However, if you are a professional who often repairs larger vehicles, a four-post lift may be more appropriate for your needs. These lifts stabilize all four wheels and are also ideal for parking two cars side-by-side or on top of one another.

A two-post lift requires a bottle jack that is not included with the lift, so you must purchase a separate bottle jack to perform these tasks. However, if you need to use a bottle jack, a four-post lift will be easier to use than a two-post lift. Additionally, you can purchase optional jack trays to prevent spilled oil on the car below. Choosing a two-post lift can be challenging, but it is important to invest in a quality lift that will be reliable and safe for your business.

Chain drive vs cable drive

Many customers ask about the chain drive vs cable-driven two post lift. Some people say the chain drive is better, while others argue that the cable-driven model is better. In the end, it’s up to you, but you’re most likely to save money in the long run if you buy a direct-drive model. Whether you choose a cable-drive or chain-driven lift depends on the needs of your company and the type of lifting work you’re going to be doing.

While chain-driven lifts can be more convenient, they can be expensive to operate and maintain. The chain-driven system requires frequent lubrication and is prone to breaking. In addition, a cable-driven lift uses the tension of its cable to maintain equalization, which can result in uneven lifting. If you are looking to purchase a two-post lift, make sure to read the installation manual thoroughly.


When comparing two types of car lifts, a 2-post versus a 4-post lift is important to keep several factors in mind. For example, a 4-post lift will be easier to load vehicles with low ground clearance, whereas a 2-post lift will be harder to load vehicles with low ground clearance. Additionally, the 4-post lift can be recessed, which will add to the cost. A 4-post lift can also include features such as a jack tray and a bottle jack. The latter is useful to prevent oil from spilling on the car beneath.

The difference between a 2-post and a 4-post lift is most evident in its lifting capacity. While a 2-post car lift requires an anchor bolt to be anchored into the ground, a 4-post lift can lift vehicles up to 14,000 pounds. To be safe, the anchor bolt should be installed at least 2.25″ from the floor. When determining the cost of a 4-post lift, be sure to consult the manual to ensure that you are getting the right type.


When choosing between a two-post car lift and a four-post lift, you should pay attention to the ground clearance and ceiling clearance of both. You want to have at least a twelve-foot clearance on the lift’s platform and at least a five-foot ground clearance. The ground clearance required for a two-post lift varies depending on the type of vehicle you’re working with. Obviously, SUVs and vans need more clearance than cars.

One safety feature to look for in a two-post car lift is the locking mechanism. Some modern 2-post lifts have failed to lock correctly after installation, and even within a short period of time of use. For more information about these problems, you can read Sector Information Minute 03/2008/12. Two-post car lifts do offer basic safety features, and most of them do. However, the safety and reliability of a 2-post Car lift depend on how accurately you can identify these lifting points.

Very symmetrical lifts

There are two main types of automotive lifts, symmetrical and asymmetrical. The symmetrical lift has its columns facing in the same direction, while asymmetrical lifts have their arms in opposite directions. Using a symmetrical lift is the safer option, as you won’t have to worry about your workers bumping into rare cars while they work. Moreover, a symmetrical lift can prevent you from losing revenue by preventing stress on your workers.

An asymmetrical lift is easier to identify than an asymmetrical one. This type has two columns set directly across each other, which allows for a wider drive through. This type of lift is used on floorplate and overhead lifts. The arms on a symmetrical lift are equal in length, which reduces the risk of the load center being tipped behind the columns. An symmetrical lift is more expensive than an asymmetrical lift, but it can be equally effective for vehicles with different dimensions.